General Engineer (Electrical) - DIRECT HIRE

Summary The Electrical Engineer performs duties involving analysis, troubleshooting, design, specification writing, drawing preparation, and cost estimating on projects/systems in the electrical, electronics and controls fields. These duties are primarily associated with the operation, maintenance and improvement of the St. Lawrence Seaway locks and related facilities owned by the

U.S. DOT.

Familiarity with related engineering fields, such as mechanical and civil, is also required. This job is open to The public U.S. Citizens, Nationals or those who owe allegiance to the U.S. Career transition (CTAP, ICTAP, RPL) Federal employees whose job, agency or department was eliminated and are eligible for priority over other applicants. Clarification from the agency Applications will be accepted from any U.S. citizen. Due to the potential of a high volume of applicants, not all applicants may receive consideration. Direct Hire Authority will be used to fill this position. The 'Rule of Three', Veterans Preference and traditional rating and ranking of applicants does not apply to this vacancy. Duties As a General Engineer (Electrical), you will : Responsible for upgrading and maintaining facilities' power distribution systems, Programmable Logic Controllers (PLC's), Human Machine Interface (HMI), and Supervisory Control and Data Acquisition (SCADA) Systems. Knowledge of PLC and HMI programming required and ability to set up graphic pages for interface by end users. Perform engineering design work for projects in the electrical and controls fields to include preliminary site investigations to determine feasibility of projects, define problem areas, and obtain data for design. Prepare preliminary design alternatives and cost estimates for evaluation prior to final design. Prepare final designs, specifications, and cost estimates for work by both contractors and Corporation personnel. Serve as technical expert and troubleshooter on controls and electrical equipment/systems, including power distribution systems, programmable logic controller systems and human machine interface software programs. Prepare written specifications and justification for capital plans; discuss projects with vendors; provide information and training to system users; prepare preliminary and final sketches and drawings for engineering projects using AutoCAD. Be responsible for the design of, and serve as the primary on administrative responsibilities, for the Lock Control/Status System, surveillance systems, Automatic Identification System (AIS), Traffic Management System (TMS}, computer-controlled HVAC systems, water level sensing and recording equipment, electronic access control systems and power distribution systems. The ideal candidate for this position will have demonstrated their ability to identify problems and develop alternative plans, while meeting fiscal and time constraints and clearly communicating with and balancing the interests of all stakeholders.

PLEASE NOTE

This announcement establishes an open continuous two-month vacancy announcement. Given our continuing need for top professionals in this field, we will review applications after the first 14 days of the vacancy opening for early consideration. Then after, applications will be reviewed on an as needed basis. Requirements Conditions of employment You must be a U.S. citizen & meet specialized experience to qualify Submit application and resume online by 11:59 PM EST on the closing date Required documents must be submitted by the closing date. Direct Hire Authority will be used to fill this position

CONDITIONS OF EMPLOYMENT

As a condition of employment for accepting this position, you will be required to serve a 1-year probationary period during which we will evaluate your fitness and whether your continued employment advances the public interest. In determining if your employment advances the public interest, we may consider: your performance and conduct; the needs and interests of the agency; whether your continued employment would advance the organizational goals of the agency or the Government; and whether your continued employment would advance the efficiency of the Federal service. Upon completion of your probationary period, your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.

SELECTIVE SERVICE

Males born after 12/31/1959 must be registered for the Selective Service.

BACKGROUND INVESTIGATION

You may be required to complete a background/security investigation and meet preliminary requirements prior to onboarding.

GOVERNMENT TRAVEL CARD

This position involves travel. A government contractor-issued travel card will be issued and must be retained for official business only.

PROBATIONARY PERIOD

Applicants may be required to successfully complete a one-year probationary period (unless already completed). Qualifications To meet the minimum qualifications for this position, you must (1) meet the Education Requirement for the series, (2) provide a copy of transcripts for verification, AND (3) meet either the education or experience requirements for the grade at which you are requesting consideration. To qualify for the GS-13 on Experience , you must have at least one year of experience equal or equivalent to the GS-12 it must include: Experience carrying out a range of professional electrical and electronics engineering tasks associated with design and/or troubleshooting of power distribution systems, electrical equipment, and control systems by applying existing precedents and standard procedures. You cannot qualify on education at the GS-13 level; you must have experience.

KNOWLEDGE, SKILLS AND ABILITIES

(KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: Attention to Detail

• Is thorough when performing work and conscientious about attending to detail. (determined at interview) Electrical Engineering
• Knowledge of the concepts, principles, theories, and methods related to the design, analysis, test, and integration of electrical systems; energy conversion; electrical power generation; and energy transmission, control, distribution or use. (determined on resume) Team Building
• Inspires and fosters team commitment, spirit, pride, and trust.

Facilitates cooperation and motivates team members to accomplish group goals. For all types of consideration, experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience For additional information about applying to Federal positions, please click on the following link: https://www.opm.gov/frequently-asked-questions/employment-faq/federal-hiring/how-do-i-apply-for-federal-jobs/ Students enrolled in a qualifying degree program can apply if the anticipated graduation date is within six months of closing date of the announcement. Graduation transcript must be received before start date. Other applicants must meet all qualification requirements by the closing date of this announcement. Education

MANDATORY EDUCATION REQUIREMENTS

A.

DEGREE:

ENGINEERING

• -To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR B. COMBINATION OF EDUCATION AND EXPERIENCE

• College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering.

The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure

• Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico.

Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test

• Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses
• Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum
• Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.

g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive). All applicants must meet the education requirements under A or B to qualify for applying to an engineering position. Transcripts are required for this position. Additional information The Fair Chance to Compete for Jobs Act prohibits the Department of Transportation and its Operating Administrations from requesting an applicant's criminal history record before that individual receives a conditional offer of employment. In accordance with 5 U.S. Code § 9202(c) and 5 C.F.R § 920.201 certain positions are exempt from the provisions of the Fair Chance to Compete Act. Applicants who believe they have been subjected to a violation of the Fair Chance to Compete for Jobs Act, may submit a written complaint to the Department of Transportation by email at, FairChanceAct@dot.gov . To learn more, please visit our page at: The Fair Chance to Compete Act | US Department of Transportation This announcement may be used to fill additional positions if similar vacancies occur within 90 days of the issue date of the referral certificate. Qualified

CTAP/ICTAP

candidates receive priority and will be referred to the hiring manager. Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. How you will be evaluated You will be evaluated for this job based on how well you meet the qualifications above.

DESCRIBING YOUR EXPERIENCE

PLEASE

BE CLEAR AND SPECIFIC. WE WILL NOT MAKE ASSUMPTIONS REGARDING YOUR EXPERIENCE.

If your resume/application does not support your questionnaire answers, we will not allow credit for your response(s). Your resume must contain sufficiently detailed information upon which to make a qualification determination. Please ensure that your resume contains specific information such as position titles, beginning and ending dates of employment for each position, average number of hours worked per week, and if the position is/was in the Federal government, you should provide the position series and grade level.

All applicants:

For this announcement, applicants may be reviewed to determine if they meet the basic qualifications for this position, specifically the educational requirements. Applications that are verified to meet the basic qualifications may be referred to the selecting official. Applicants will not be rated or ranked. Veteran's Preference does NOT apply. Please ensure that your work history provides enough details to support your answers. You may preview questions for this vacancy.

Required Documents RESUME:

In accordance with the OPM memorandum titled Merit Hiring Plan, dated May 29, 2025, resumes with a maximum of two (2) pages in length will be accepted as part of your application. These should be legible and in a readable font size. A determination of your eligibility and/or qualifications will be based only on those two (2) pages. Your resume MUST contain specific information that can be used to make a qualification determination , including employment beginning and ending dates for each position, whether employment is Full-time or Part-time, or average number of hours worked per week, and position titles. If the position is/was in the Federal government, you will need to provide the position series and grade level. The resume should show relevant experience and education, as well as support the required specialized experience. For assistance with the resume builder, please visit : https://help.usajobs.gov/how-to

DISPLACED EMPLOYEES

If requesting consideration under the Career Transition Assistance Program (CTAP) or Interagency CTAP program (ICTAP), you must meet the standards for this vacancy and provide all of the following documents: your most recent performance appraisal, the proof of eligibility letter from the Agency, and your most current SF-50, displaying current series and grade. Displaced employees may be eligible for ICTAP or CTAP priority consideration. For more information, please review the OPM Employee's Guide to Career Transition. Failure to submit any of the required documents by the closing date of the vacancy will result in your removal from consideration for this position. Please review your application prior to final submission and ensure you have submitted all appropriate documents. Uploading documents to USA Jobs does NOT ensure inclusion with your application to our system. You must verify that the documents are in the system with your application prior to final submission. If you are relying on your education to meet qualification requirements: Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education . Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating. How to Apply You must submit a complete application package (including resume, vacancy questions and supporting documents) no later than 11:59 pm (EST) on the closing date of the announcement. To begin, click the "Apply Online" button on the job announcement posting. Follow the directions to register, submit all required documents and complete the assessment questionnaire. You may review your saved application(s) at https://help.usajobs.gov/ If you are having difficulty applying online, please contact the DOT Automated Staffing Office via email at: Transjobs@dot.gov Agency contact information Automated Staffing Office Phone 000-000-0000 Fax 000-000-0000 Email

TRANSJOBS

@dot.gov Address

DOT, GREAT LAKES ST. LAWRENCE SEAWAY DEV. CORP.

Submit Application and Documents Online 1200 New Jersey Ave

SE / HAHR

• 50 Washington, District of Columbia 20590 United States Next steps You may check your application status by logging into USAJobs.

com (Select "My USAJobs" and click "Applications". Within two weeks of the closing date, a Human Resources Specialist may evaluate your application. If evaluated, qualified candidates will be referred to the hiring manager. If you are selected for an interview, the hiring agency will contact you directly. Once the position is filled, we will notify all applicants of their final status.