Pay Growth
?
out of 5
Not enough data
Not enough info to score pay or growth
ITS Technician
Job
Lumin8 Transportation Technologies
Full-Time
Review key factors to help you decide if the role fits your goals.
Job Security
?
out of 5
Not enough data
Calculating job security score...
Total Score
63
out of 100
Average of individual scores
Skill Insights
Compare your current skills to what this opportunity needs—we'll show you what you already have and what could strengthen your application.
Job Description
Role SummaryThe ITS Technician installs, integrates, commissions, and maintains Intelligent Transportation Systems (ITS) field equipment including CCTV, radar/IVDS, DMS, communications cabinets, network switches, wireless/cellular equipment, and associated low-voltage and fiber transport systems. The ITS Technician ensures devices communicate reliably with Transportation Management Centers (TMC/TOC), meet DOT/municipal specifications, and support system acceptance and operational uptime.
This role spans construction, commissioning, and maintenance support within a live public safety environment.
Primary ResponsibilitiesField Installation & Device IntegrationInstall and wire CCTV, radar/IVDS detection, DMS, lowering devices, cabinets, field switches, encoders/decoders, power supplies, and comms hardware.
Configure field switches, cellular modems, and wireless backhaul radios per IP addressing and network architecture provided.
Patch fiber and copper terminations (Cat5/6) within cabinets and field enclosures.
Align, aim, and commission cameras, radar, and device sensors to operational requirements.
Perform cabinet power-up, device bring-up, and verification testing.
Networking & CommunicationsAssign and configure IP addresses, VLANs, and port settings as required for device connectivity.
Work with DOT/agency network teams or vendors to integrate field devices into monitoring and SCADA systems.
Troubleshoot L1L3 failures including:link down / LSP lossduplex and speed mismatchesVLAN misconfigurationsrouting issuesfiber/copper continuityRF alignment issuesmodem provisioning impactsCommissioning & AcceptanceSupport device acceptance testing with DOT/municipal inspectors and TOC/NOC.Coordinate with agency engineers during controller, VMS, CCTV, or sensor commissioning.
Document device operational status, signal strength, latency, link quality, and system integration steps.
Maintenance & TroubleshootingRespond to field service calls for device outages, comms faults, detection failures, and physical damage.
Use OTDR, fiber scope, power meter, laptop diagnostics, and SNMP tools as applicable.
Replace failed components (radar heads, encoders, switches, cameras, fuses, POE injectors, power supplies, etc.).Support firmware updates, configuration changes, and device tuning.
Traffic Safety & Work Zone ControlInterpret MUTCD lane closure requirements for installations and repairs.
Set up traffic control or coordinate closures with MOT crews/GCs as required.
Work safely in bucket trucks, lifts, ladders, and near live traffic.
Documentation & ReportingRecord device install locations, cable IDs, splices, connectors, test results, and cabinet configurations.
Complete daily field reports and asset documentation for agency turnover.
Update as-builts and device inventories as required for maintenance programs.
Required Skills & Experience1+ years in ITS, low-voltage, traffic signal, fiber, CCTV/security, or telecom fieldwork.
Proficiency with basic IP networking (L1/L2/L3 concepts, IP addressing, VLAN).Ability to read and interpret ITS plans, risers, wiring diagrams, and network details.
Low-voltage troubleshooting with laptop and test equipment.
Strong communication skills for interacting with DOT, GC, vendors, and inspectors.
Preferred CompetenciesFiber splicing (fusion) & OTDRCCTV aiming/focus & NVR/VMS integrationRadar/VDS commissioningWireless microwave/cellular alignmentSNMP monitoring systems (TOC/NOC integration)Certifications (Preferred, Not Required Day 1)IMSA Transportation Field TechnicianCompTIA Network+ or equivalent networking baselineFiber certification (FOA/ETA or vendor-specific)OSHA 10/30MOT/Flagger (MUTCD-based)First Aid/CPRBucket truck/aerial liftCDL (bonus)Work EnvironmentOutdoor field work in all weatherWork in cabinet environments and elevated positionsDay/night shifts depending on lane closure windowsTravel within region with occasional overnightsLifting up to 75 lbs
This role spans construction, commissioning, and maintenance support within a live public safety environment.
Primary ResponsibilitiesField Installation & Device IntegrationInstall and wire CCTV, radar/IVDS detection, DMS, lowering devices, cabinets, field switches, encoders/decoders, power supplies, and comms hardware.
Configure field switches, cellular modems, and wireless backhaul radios per IP addressing and network architecture provided.
Patch fiber and copper terminations (Cat5/6) within cabinets and field enclosures.
Align, aim, and commission cameras, radar, and device sensors to operational requirements.
Perform cabinet power-up, device bring-up, and verification testing.
Networking & CommunicationsAssign and configure IP addresses, VLANs, and port settings as required for device connectivity.
Work with DOT/agency network teams or vendors to integrate field devices into monitoring and SCADA systems.
Troubleshoot L1L3 failures including:link down / LSP lossduplex and speed mismatchesVLAN misconfigurationsrouting issuesfiber/copper continuityRF alignment issuesmodem provisioning impactsCommissioning & AcceptanceSupport device acceptance testing with DOT/municipal inspectors and TOC/NOC.Coordinate with agency engineers during controller, VMS, CCTV, or sensor commissioning.
Document device operational status, signal strength, latency, link quality, and system integration steps.
Maintenance & TroubleshootingRespond to field service calls for device outages, comms faults, detection failures, and physical damage.
Use OTDR, fiber scope, power meter, laptop diagnostics, and SNMP tools as applicable.
Replace failed components (radar heads, encoders, switches, cameras, fuses, POE injectors, power supplies, etc.).Support firmware updates, configuration changes, and device tuning.
Traffic Safety & Work Zone ControlInterpret MUTCD lane closure requirements for installations and repairs.
Set up traffic control or coordinate closures with MOT crews/GCs as required.
Work safely in bucket trucks, lifts, ladders, and near live traffic.
Documentation & ReportingRecord device install locations, cable IDs, splices, connectors, test results, and cabinet configurations.
Complete daily field reports and asset documentation for agency turnover.
Update as-builts and device inventories as required for maintenance programs.
Required Skills & Experience1+ years in ITS, low-voltage, traffic signal, fiber, CCTV/security, or telecom fieldwork.
Proficiency with basic IP networking (L1/L2/L3 concepts, IP addressing, VLAN).Ability to read and interpret ITS plans, risers, wiring diagrams, and network details.
Low-voltage troubleshooting with laptop and test equipment.
Strong communication skills for interacting with DOT, GC, vendors, and inspectors.
Preferred CompetenciesFiber splicing (fusion) & OTDRCCTV aiming/focus & NVR/VMS integrationRadar/VDS commissioningWireless microwave/cellular alignmentSNMP monitoring systems (TOC/NOC integration)Certifications (Preferred, Not Required Day 1)IMSA Transportation Field TechnicianCompTIA Network+ or equivalent networking baselineFiber certification (FOA/ETA or vendor-specific)OSHA 10/30MOT/Flagger (MUTCD-based)First Aid/CPRBucket truck/aerial liftCDL (bonus)Work EnvironmentOutdoor field work in all weatherWork in cabinet environments and elevated positionsDay/night shifts depending on lane closure windowsTravel within region with occasional overnightsLifting up to 75 lbs
BENEFITS
The following benefits are included on the 1st day of the month following your date of hire: Health, Dental, and Vision InsuranceBasic Life Insurance & AD&DHealth Care & Dependent Care Flexible Spending AccountShort Term Disability Long Term Disability401(k) plan (with matching)Paid VacationPaid HolidaysLumin8 is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability or genetic information. LGBTQIA, Veterans, and women friendly!Similar remote jobs
Roy Talman & Associates
Chicago, IL
Posted1 day ago
Updated9 hours ago