CMM Programmer

POSITION SUMMARY

The CMM Programmer/ Inspector's primary responsibility is to program and operate Coordinate Measuring Machines (CMMs) to measure the dimensions and geometries of manufactured parts. They will analyze measurement data, compare results to engineering drawings, and generate reports to ensure parts meet quality standards. Additionally, they will contribute to process improvement efforts and maintain equipment to ensure accurate and reliable measurements.

DUTIES AND RESPONSIBILITIES

Programming CMM:

Developing measurement programs for the CMM based on engineering drawings, CAD models, or other specifications. This involves understanding geometric dimensioning and tolerancing (GD&T) principles and selecting appropriate measurement strategies.

Calibration and Setup:

Calibrating the CMM machine regularly to ensure accurate measurements. Setting up the machine for specific measurement tasks, including fixture design and alignment.

Measurement and Inspection:

Operating the CMM to measure dimensions, geometries, and surface characteristics of machined parts. Inspecting parts against engineering drawings and specifications to verify conformance to quality standards.

Data Analysis:

Analyzing measurement data to identify trends, deviations, and potential quality issues. Using statistical methods and software tools to interpret measurement results and make decisions about part acceptance or rejection.

Documentation and Reporting :

Documenting measurement procedures, results, and any deviations from specifications. Generating inspection reports and certificates to communicate findings to stakeholders, such as production teams, quality assurance personnel, or customers.

Troubleshooting and Maintenance :

Troubleshooting issues with the CMM machine or measurement equipment and performing routine maintenance tasks to ensure optimal performance and reliability. Provide value to our customers by using Lean tools and concepts to identify and eliminate waste in all forms (scrap/rework, transportation, motion, waiting, inventory, over production, over processing, and under-utilization of people). Uses systemic thinking by seeing processes from end to end and works to challenge the status quo to eliminate the root cause of problems. Is involved in individual and/or team activities that involve using Lean tools and concepts to improve the flow of information and material. Other duties as assigned.

KEY PERFORMANCE METRICS

• Measurement Accuracy
• Inspection Efficiency

PHYSICAL REQUIREMENTS

• Must be able to lift 10-20 pounds frequently, and up to 50 pounds periodically.
• Must be able to stand/walk/sit for up to 8 hours per day

MINIMUM REQUIREMENTS

Education:

A high school diploma or equivalent experience

Experience:

Prefer prior experience in quality control, manufacturing, or working in a similar environment

Technical Skills:

Proficiency in computer-aided design (CAD) software and metrology software used for programming CMMs is essential. Knowledge of geometric dimensioning and tolerancing (GD&T) principles and measurement techniques is also important.

Problem Solving Skills:

Ability to troubleshoot issues with CMM equipment, measurement programs, or part quality is critical.

• Attention to

Detail:

Requires meticulous attention to detail to accurately interpret specifications, program measurement routines, and analyze measurement data. Pay $30

• $35/hr

DOE Job Type:

Full-time Pay:

$28.00

• $33.

00 per hour

Benefits:

401(k) 401(k) matching Dental insurance Health insurance Paid time off Vision insurance

Experience:

CMM:

2 years (Required)

Manufacturing:

5 years (Required) Shift availability: Day Shift (Required) Night Shift (Preferred) Ability to

Commute:

Endicott, NY 13760 (Required)

Work Location:

In person CMM Programmer 1 South Page Avenue, Endicott, NY 13760 $28

• $33 an hour
• Full-time $28
• $33 an hour
• Full-time

POSITION SUMMARY

The CMM Programmer/ Inspector's primary responsibility is to program and operate Coordinate Measuring Machines (CMMs) to measure the dimensions and geometries of manufactured parts. They will analyze measurement data, compare results to engineering drawings, and generate reports to ensure parts meet quality standards. Additionally, they will contribute to process improvement efforts and maintain equipment to ensure accurate and reliable measurements.

DUTIES AND RESPONSIBILITIES

Programming CMM:

Developing measurement programs for the CMM based on engineering drawings, CAD models, or other specifications. This involves understanding geometric dimensioning and tolerancing (GD&T) principles and selecting appropriate measurement strategies.

Calibration and Setup:

Calibrating the CMM machine regularly to ensure accurate measurements. Setting up the machine for specific measurement tasks, including fixture design and alignment.

Measurement and Inspection:

Operating the CMM to measure dimensions, geometries, and surface characteristics of machined parts. Inspecting parts against engineering drawings and specifications to verify conformance to quality standards.

Data Analysis:

Analyzing measurement data to identify trends, deviations, and potential quality issues. Using statistical methods and software tools to interpret measurement results and make decisions about part acceptance or rejection.

Documentation and Reporting :

Documenting measurement procedures, results, and any deviations from specifications. Generating inspection reports and certificates to communicate findings to stakeholders, such as production teams, quality assurance personnel, or customers.

Troubleshooting and Maintenance :

Troubleshooting issues with the CMM machine or measurement equipment and performing routine maintenance tasks to ensure optimal performance and reliability. Provide value to our customers by using Lean tools and concepts to identify and eliminate waste in all forms (scrap/rework, transportation, motion, waiting, inventory, over production, over processing, and under-utilization of people). Uses systemic thinking by seeing processes from end to end and works to challenge the status quo to eliminate the root cause of problems. Is involved in individual and/or team activities that involve using Lean tools and concepts to improve the flow of information and material. Other duties as assigned.

KEY PERFORMANCE METRICS

• Measurement Accuracy
• Inspection Efficiency

PHYSICAL REQUIREMENTS

• Must be able to lift 10-20 pounds frequently, and up to 50 pounds periodically.
• Must be able to stand/walk/sit for up to 8 hours per day

MINIMUM REQUIREMENTS

Education:

A high school diploma or equivalent experience

Experience:

Prefer prior experience in quality control, manufacturing, or working in a similar environment

Technical Skills:

Proficiency in computer-aided design (CAD) software and metrology software used for programming CMMs is essential. Knowledge of geometric dimensioning and tolerancing (GD&T) principles and measurement techniques is also important.

Problem Solving Skills:

Ability to troubleshoot issues with CMM equipment, measurement programs, or part quality is critical.

• Attention to

Detail:

Requires meticulous attention to detail to accurately interpret specifications, program measurement routines, and analyze measurement data. Pay $30

• $35/hr

DOE Job Type:

Full-time Pay:

$28.00

• $33.

00 per hour

Benefits:

401(k) 401(k) matching Dental insurance Health insurance Paid time off Vision insurance

Experience:

CMM:

2 years (Required)

Manufacturing:

5 years (Required) Shift availability: Day Shift (Required) Night Shift (Preferred) Ability to

Commute:

Endicott, NY 13760 (Required)

Work Location:

In person