Compare your current skills to what this opportunity needs—we'll show you what you already have and what could strengthen your application.
Job Description
GMAW Fabrication Specialist Picture your day on the floor: you review a print, lay out steel with precision, set your MIG parameters, and run clean, consistent beads in flat, horizontal, vertical, and overhead positions. You verify fit-up, check tolerances with micrometers and calipers, and record your results so the next operator knows exactly where things stand. When something isn't right, you stop, contain the issue, and alert your lead immediately. That combination of craftsmanship and accountability is what we're looking for. What you'll do Lay out, position, and secure components to spec using jigs/fixtures, then tack and complete welds with GMAW and other processes as needed. Interpret engineering drawings and follow defined weld symbols, sequences, and assembly requirements. Dial in equipment settings (voltage, amperage, wire speed, shielding gas) to achieve the required arc characteristics and penetration. Maintain equipment through routine preventive checks, basic troubleshooting, and arranging repairs when needed. Capture production and quality information in logs and travelers with accurate, timely entries. Use precision tools (micrometers, calipers, gauges) to inspect parts and verify conformance.
Model strong attendance and reliability:
arrive prepared, follow your schedule, and remain focused through the shift. Champion quality and safety every time—do it right the first time, use required PPE, and follow all shop rules and procedures.
Own your results:
take responsibility for the volume and quality of work produced and continually pursue better.
Note:
The core tasks above reflect the most important responsibilities, but you may be assigned related duties as business needs evolve. This description may be updated at any time. Process discipline Follow documented procedures, work instructions, and operational processes. Not following these standards can lead to: Increased customer rejections Higher internal scrap Delayed or late shipments Personal injury Negative environmental impact All employees must contain any nonconforming product and notify management immediately. This position has no supervisory responsibilities. Qualifications At least 1 year of MIG welding experience or equivalent formal training Successful completion of CIT weld test Hands-on proficiency with multiple welding processes and procedures Comfort using shop tools (saws, squares, calipers, etc.) Ability to read and interpret technical drawings and documentation Strong safety awareness and consistent use of PPE (face shield, gloves, etc.) Fine motor skill, steady hand, and high attention to detail AWS certification is a plus Work environment This role is based in a manufacturing setting. Expect loud noise, welding fumes and airborne particles, moving machinery, and vibration. You may work with or near chemicals; safety information is provided on accessible Safety Data Sheets. Moderate temperature changes can occur during an eight-hour shift. Physical demands Regularly talk and hear while performing duties Frequently stand, walk, use hands to handle or feel, reach with hands and arms, climb or balance, and stoop, kneel, crouch, or crawl Frequently lift/move up to 25 lbs; occasionally lift/move up to 75 lbs Vision requirements include close vision, color vision, and the ability to adjust focus Accessibility Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Schedule, location, and tools
Shift:
Day Shift Work Location:
In person Ability to
Commute:
Richmond, IN 47374 (Required) Primary equipment: MIG Welder Benefits 401(k) with company match Dental insurance Health insurance Life insurance Paid time off Vision insurance People with a criminal record are encouraged to apply.
