Lead Design Release Engineer GM Defense

Engineering Lead Design Release Engineer

• GM Defense 위치 Warren, Michigan (+) Show all locations
• ) Hide all locations 직무 유형 Full time 게시됨 5 14 2026 Job Requisition

JR-202610909

설명 General Motors Defense has multiple positions open! Please apply to be considered for a role in: Chassis, Body, Interior, Electrical, Software, Powertrain/RESS About GM Defense GM Defense delivers integrated vehicles and mobility solutions to defense, government, and security customers by leveraging the best of General Motors' commercial technologies. We rapidly adapt proven architectures, components, and processes from GM's global portfolio to meet demanding military and government requirements for performance, survivability, reliability, and total lifecycle cost. The Role GM Defense is seeking Lead Design Release Engineers to serve as the single accountable engineering owners for major subsystems on current and future defense programs. Open roles support the following domains: Chassis (frame, suspension, steering, brakes, wheels/tires, driveline) Body / Exterior / Structures (BIW, closures, armor integration, exteriors, glazing, underbody) Interior (seating, restraints, IP/console, trim, HVAC interfaces, human factors) Electrical (low-voltage distribution, harnesses, controllers, sensors/actuators, power management) Software / Controls (embedded software, vehicle features, diagnostics, cybersecurity, integration of COTS and defense-specific software) Powertrain / RESS (engine integration, transmission/driveline interfaces, cooling, fuel systems, propulsion packaging, high-voltage battery systems, battery controls, charging interfaces, energy management) In this role, you will own requirements, design, release, validation, issue resolution, and lifecycle change management for your assigned subsystem. You will drive technical direction across the program and ensure GM Defense solutions meet performance, safety, quality, cost, schedule, and compliance targets. What You'll Do Technical Ownership Serve as the single accountable engineering owner for a major subsystem from concept through production and sustainment Translate customer, regulatory, and military standards into clear technical requirements and design targets Own and maintain subsystem requirements, DFMEAs, DVPRs, BOMs, and CAD/CAE data Lead architecture definition, trade studies, and technical decision-making across the subsystem Design & Release Lead the design, selection, and integration of components using GM production content, Commercial off the Shelf (COTS), and bespoke defense solutions Ensure designs are packaged, manufacturable, serviceable, and compatible with armor, mission equipment, and adjacent vehicle systems Execute formal part release and configuration control in GMD systems, including SOR, ICD, BOM, drawings, and specifications Drive engineering changes and configuration decisions across variants. Validation & Quality Define and lead validation plans across bench, vehicle, and field test environments Drive issue identification, root cause analysis, containment, and corrective actions using structured problem-solving methods Support safety, durability, EMC, environmental, and survivability test activities, including readiness reviews and issue resolution Cross-Functional Integration Lead coordination with systems engineering, vehicle integration, manufacturing, supply chain, quality, and program management Interface directly with suppliers and technical partners, setting expectations and reviewing designs, analyses, and validation evidence Support build events at GM and partner sites, resolving integration, launch, and field issues in real time Program Execution Develop and maintain engineering timing, deliverables, technical risks, and mitigation plans for the subsystem Provide clear status, risk, and trade-off recommendations to program leadership and customer-facing teams Support RFI/RFP responses Mentor and provide technical leadership to other engineers supporting the subsystem Compliance & Configuration Ensure subsystem design and release comply with relevant military standards, regulations, and customer requirements Maintain robust configuration management across program phases, variants, and change events Support export control, security, and customer-specific program compliance requirements as applicable Domain-Specific Focus Areas Chassis Lead DRE Own frame, tie down and sling load points , suspension, steering, braking, wheels/tires, and driveline interfaces for on

• and off-road mission profiles Balance ride/handling, payload, towing, mobility, and survivability requirements, including up-armored configurations Integrate commercial chassis content with defense-specific payloads, armor, and mobility upgrades Lead vehicle dynamics, braking, durability, NVH, and rollover-related technical decisions and validation support Body / Exterior Lead DRE Own body-in-white, closures, exteriors, glazing, underbody systems, and armor integration interfaces Develop structural solutions that support crew protection, blast/ballistic objectives, and mission payloads while managing mass and manufacturability Ensure robust sealing, corrosion protection, environmental performance, and maintainability Lead packaging and integration of antennas, external sensors, racks, and mission equipment on body structures Interior Lead DRE Own seating systems, restraints, interior trim, IP/console, stowage, and crew interface elements Ensure interior designs meet ergonomics, human factors, safety, and mission-effectiveness targets, including operation with PPE Integrate HVAC, communications, displays, controls, and power/data interfaces into the interior environment Lead trade-offs across comfort, durability, cleanability, and rapid reconfiguration for mission flexibility Electrical Lead DRE Own power distribution, harnesses, junction boxes, controllers, lighting, sensors/actuators, and key subsystem interfaces Design architectures that support high electrical loads, mission systems, exportable power, robustness, and redundancy Ensure compliance with EMC/EMI, environmental, safety, and cybersecurity requirements in partnership with specialists Coordinate closely with software and controls to ensure robust electrical and data interfaces Software / Controls Lead DRE Own embedded software requirements, integration, and validation for assigned vehicle features or mission-related functions Integrate GM production software, COTS components, and defense-specific applications to ensure reliable vehicle-level behavior Lead software validation strategies, including HIL/SIL, vehicle test, diagnostics, and update approaches where applicable Collaborate on cybersecurity, functional safety, diagnostics, and data management approaches aligned to program needs and standards Powertrain / RESS Lead DRE Own propulsion system integration, including engine, transmission, driveline interfaces, cooling, fuel systems, mounts, and associated subsystem packaging as applicable to the platform Own Rechargeable Energy Storage System (RESS) design release and integration, including battery pack, mounting, thermal interfaces, electrical/mechanical interfaces, serviceability, and protection strategies Balance performance, range, mobility, survivability, thermal performance, packaging, mass, and reliability requirements across mission profiles Integrate GM production content, COTS components, and defense-specific propulsion or energy storage solutions to support vehicle and mission needs Lead validation and issue resolution for propulsion and RESS-related requirements, including durability, thermal performance, environmental robustness, safety, diagnostics, and vehicle-level integration Your Skills & Abilities (Required Qualifications) Bachelor's degree in Engineering 5+ years of relevant product engineering experience in automotive, commercial vehicle, defense, aerospace, or a closely related industry Demonstrated experience as a Lead Design Release Engineer, technical lead, or equivalent , with end-to-end responsibility for a major subsystem Proven ability to lead work through concept, design, validation, launch, and field support on complex engineered products Experience working in CAD/CAE and PLM environments, including formal change management and part release processes Strong problem-solving, root cause analysis, and issue resolution skills in a fast-paced, hardware-focused environment Excellent communication and collaboration skills, with the ability to interface effectively with suppliers, customers, and cross-functional teams Demonstrated ability to lead technical direction, manage subsystem risk, and mentor other engineers Candidate must be a U.

S. Person (U.S. citizen, U.S. permanent resident, asylee or refugee). What Will Give You A Competitive Edge (Preferred Qualifications) Advanced degree in a relevant engineering discipline Direct experience with military or government vehicle programs, standards, or acquisition processes Familiarity with GM engineering processes, systems, and tools, including bills of material, release systems, and global vehicle development processes Experience in one or more of the following:

Chassis:

vehicle dynamics, durability, off-road mobility, heavy payloads

Body:

crashworthiness, armor integration, blast/ballistic considerations, advanced materials

Interior:

human factors, safety systems, occupant packaging, ruggedized interiors

Electrical:

high-demand power distribution, EMC/EMI, ruggedized harness design

Software:

embedded controls, AUTOSAR or similar architectures, diagnostics, cybersecurity Prior work in low

• to medium-volume, highly configured products and/or rapid prototyping environments Experience supporting build events, fielding, or sustainment for defense or commercial fleets Work Location & Travel Primary work location: GM Global Technical Center (Warren, MI) or other GM Defense-designated engineering sites Regular on-site presence expected to support labs, builds, and cross-functional collaboration Ability and willingness to travel domestically, and occasionally internationally, to test sites, supplier locations, and customer facilities as required #GMD GM does not provide immigration-related sponsorship for this role.

Do not apply for this role if you will need GM immigration sponsorship now or in the future. This includes direct company sponsorship, entry of GM as the immigration employer of record on a government form, and any work authorization requiring a written submission or other immigration support from the company (e.g., H1-B, OPT, STEM OPT, CPT, TN, J-1, etc.) 이 직무는 하이브리드 직무로 분류됩니다. 즉, 선발된 지원자는 특정 근무지로 주 3일 이상(또는 관리자가 지정한 다른 빈도로) 특정 근무지로 출근해야 합니다. 선발된 지원자는 이 직무를 위해 25% 미만의 출장을 다녀야 합니다. 이 직무는 리로케이션 혜택을 받을 수 없습니다. 모든 리로케이션 관련 비용은 최종선정 된 지원자가 부담해야 합니다. 다양성 정보 General Motors는 법적으로 금지된 차별을 배제하는 것은 물론 포용성과 소속감을 진정으로 장려하는 직장이 되기 위해 노력하고 있습니다. 당사는 다양성이 보장되는 환경에서 직원들이 역량을 발휘하고 우리 고객을 위한 더 좋은 제품을 개발할 수 있다고 믿습니다. 따라서 입사에 관심 있는 사람이 있다면 포지션별 주요 업무와 자격을 확인하고 본인이 보유한 기술과 능력에 부합하는 모든 포지션에 적극적으로 지원하기를 장려합니다. 지원자는 채용 과정에서 역할 관련 평가(해당하는 경우) 및/또는 채용 전 스크리닝을 통과해야 합니다. 자세한 정보는 GM 채용 과정 안내 를 참고하십시오. 공평한 취업 기회 선언 (미국) General Motors는 공평한 기회를 제공하는 고용주임을 자부합니다. 자격을 만족하는 지원자는 인종과 피부색, 성별, 성적 지향, 성별 정체성, 국적, 장애, 재향 군인 보호법 적용 여부와 상관없이 채용 후보로서 심사를 받습니다. 숙소 (미국 및 캐나다) General Motors는 장애인을 포함한 모든 구직자들에게 취업 기회를 제공합니다. 구직이나 취업 지원에 도움이 되는 합리적인 숙소가 필요한 경우 Careers.

Accommodations@GM.com 으로 이메일을 보내시거나 800-865-7580으로 전화주십시오. 이메일에, 귀하가 요청하는 특정한 숙소에 대한 설명과 귀하가 지원하는 직무와 채용 요청서 번호를 포함해주세요. 지금 신청하세요 구하다 저장됨 [Open sharing options] [Share] 관련 작업 구하다 저장됨 Warren, Michigan Design Release Engineer

• GM Defense 구하다 저장됨 Warren, Michigan Design Release Engineer (DRE)
• Armor
• GM Defense 구하다 저장됨 Warren, Michigan ADAS Design Release Engineer (DRE) for Cameras 엔지니어링 Team 처음부터 끝까지 우리 엔지니어링 팀은 모든 경험에서 가능한 것의 한계에 도전합니다.