Country United States of America

State / County California

City Paramount

Division Wyman Gordon

Company Aerocraft Heat Treating

Function Operations

Workplace Type On-Site

Position type Full Time Opportunity

ID 23561

Job Description Under direct supervision, level one heat treat operators load and unload baskets for heat treat prep. As well as unload baskets post heat treat. They will also update data production logs, and update MRP/ERP. Demonstrate the ability to correctly interpret work orders to verify raw material lot control number, basic print reading to verify part identification.

ESSENTIAL JOB RESPONSIBILITIES

Review orders in process, time out, cooling methods

Review production schedule for orders per furnace

Prepare production loads per furnace availability

Ensure furnaces are not left idle for longer than required

Identify material per shop traveler information and instructions

Verify identification of material matches Job Card. (i.e. Qty, Type,Heat #'s,etc.)

Rack material for free circulation of heating & cooling medium per shop order instructions and not to exceed required furnace working zone and temperature/ tolerance requirements

Ensure heat number separation is maintained, when required. Steel stamp bars as required

Clean/precoat material

Load/Unload furnaces, as required. Assist in setting and checking furnace instrumentation

Assist in attaching load thermocouples and following other special instructions listed on the job card

Perform degreasing operation

As required transfer parts from SS racks to wood pallets, Position job for next process. Ensure heats are separate and tags are attached.

Oversees heat treatment of open and closed die forgings, in house conversions of ingots, billets, and rolled rings, with minimal supervision

Possesses thorough understanding of controlling and monitoring all heat treat furnaces as well as their limits and capabilities

Prepares furnace loads, dependent upon material type and quantity allowable in furnace

Verifies piece count and straightness and flatness of parts before and after material is heat treated

Performs cold and hot straightening if necessary

Conducts hardness inspection of material

Oversees furnace light up and monitoring

Operate a forklift and safely load and unload materials

Perform visual inspections for part defects or damage

Other duties as assigned Requirements High school diploma or GED required. Relevant certificate of completion from a technical school preferred but not required.

Experience in manufacturing industry is highly preferred but not required.

1+ years of related work experience and/or training; or equivalent combination of education and experience.

PHYSICAL DEMAND

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee frequently is required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 35 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts and outside weather conditions. The employee is frequently exposed to wet and/or humid conditions. The employee is occasionally exposed to high, precarious places; fumes or airborne particles; toxic or caustic chemicals; extreme cold; extreme heat; and vibration. The noise level in the work environment is usually loud. Precision Castparts Corp. is an equal opportunity employer commit ted to recruit, hire, train and promote in all job categories without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status or other status protected by applicable law.

Note:

This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e., 'Green Card Holder'), Political Asylee, or Refugee. Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

For informational purposes only, the range of pay for this role is $19.50 to $24.50 US Dollar (USD) Hourly based on a variety of factors. For informational purposes only, this role is eligible to participate in the Company's Quarterly Cash Bonus Plan, paid out at the quarterly bonus factor of 1X the Company's bonus multiple, based on the Company's performance in the applicable quarter. Employees will receive 80 hours paid time off every year. Employees will also receive 10 paid holidays. Employees (and their families) are eligible to participate in the company's medical, dental, vision, and basic life insurance. Employees are eligible to enroll in the Company's 401(k) plan.

This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To comply with those regulations, this position may require applicants to be U.S. Persons (i.e., U.S. citizens, U.S. lawful permanent residents, protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required export authorizations from the U.S. Department of State or the U.S. Department of Commerce.

Company Profile With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit. PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth. In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp.

Location Profile:

Aerocraft Heat Treating CO. Inc is a PCC owned commercial heat treater of steel, titanium, & high temperature materials. Founded in 1959, Aerocraft processes forgings, castings, bar, plate, and rough-machined parts. Materials are processes for most of the aerospace prime contractors. Precision Castparts Corp. and its affiliates do not accept unsolicited resumes from search firms or employment agencies. Unsolicited resumes will become the property of Precision Castparts Corp & its affiliates, and no fee will be paid.