NDT Inspector - focus on penetrant and dye check inspection-DIRECT JOB (JobID#2130040296)

This occupation requires the operation of magnetic, penetrant and dye check inspection equipment and the subsequent inspection for defects in ferrous and non-ferrous welded, forged, cast, raw and machined parts. Work Performed Inspects ferrous and non-ferrous parts in which defects have been detected or indicated by processing in magnetic testing, penetrant or dye check equipment and makes proper disposition. Visually examines iron oxide powder, penetrant oil or dye check patterns basing disposition (accepted, rejected, or rework) upon buildup, location, and course of pattern, depth and number of defects and nature of part and fabrication operations involved. Makes recommendation where defect can and should be eliminated by grinding or machining and approves rework method when parts are salvageable. Checks with proper personnel if oxide patterns reveal presence of inclusions of foreign substances. Plans and advises on method of setting up parts and operating magnetic and penetrant inspection equipment as directed. Loads parts, operates crane while processing, inspects, unloads parts and cleans and removes masking materials as necessary. Performs material hardness and conductivity inspections as directed. Determines amperage required to magnetize parts and uses demagnetizing equipment as required where specifications prohibit polarization. Checks etch rate on etch tank and runs sample part daily. Determines penetration time and emulsifier time if information is not in specifications. Determines proper sequence of dips and rinses. Determines whether parts are to be magnafluxed, penetrant inspected or dye checked and whether parts can be etched. Stamps parts, tags, shop orders, and prepares paperwork and parts as required. Must obtain a magnetic and penetrant inspection certificate and have eyes checked yearly. Performs duties incidental to the accomplishment of the assigned task.