Job details Summary Spherion $25.00 per hour Permanent 7:30 AM - 4:00 PM Industry construction, trades & mining (Construction and Extraction Occupations) Reference number S_179325 Job details
Welding & Fabrication:
Perform high-quality MIG welds on mild steel, stainless steel, and aluminum components across various positions (flat, horizontal, vertical, overhead).
Equipment Set Up:
Configure GMAW machines for specific metals, including setting appropriate voltage, wire feed speed, gas flow rates (e.g., 100% Argon for aluminum vs. Argon/CO2 mixes for steel), and drive roll setups (e.g., spool guns or push-pull systems for aluminum). ...
Material Preparation:
Clean, degrease, wire brush, and prep joints???especially aluminum surfaces???to eliminate oxides, oils, and moisture prior to welding.
Blueprint Reading:
Interpret mechanical drawings, AWS welding symbols, blueprints, and job specifications to measure, cut, and assemble components accurately.
Post-Weld Assembly & Finish:
Inspect welds for penetration, porosity, cracks, and undercut; grind, finish, or clean welds using hand and power tools as required.
Quality & Safety:
Maintain strict compliance with safety guidelines (PPE, ventilation, eye protection) and complete quality check documentation for finished parts.
Responsibilities:
Welding & Fabrication:
Perform high-quality MIG welds on mild steel, stainless steel, and aluminum components across various positions (flat, horizontal, vertical, overhead).
Equipment Set Up:
Configure GMAW machines for specific metals, including setting appropriate voltage, wire feed speed, gas flow rates (e.g., 100% Argon for aluminum vs. Argon/CO2 mixes for steel), and drive roll setups (e.g., spool guns or push-pull systems for aluminum).
Material Preparation:
Clean, degrease, wire brush, and prep joints???especially aluminum surfaces???to eliminate oxides, oils, and moisture prior to welding.
Blueprint Reading:
Interpret mechanical drawings, AWS welding symbols, blueprints, and job specifications to measure, cut, and assemble components accurately.
Post-Weld Assembly & Finish:
Inspect welds for penetration, porosity, cracks, and undercut; grind, finish, or clean welds using hand and power tools as required.
Quality & Safety:
Maintain strict compliance with safety guidelines (PPE, ventilation, eye protection) and complete quality check documentation for finished parts.
Working hours:
7:30 AM - 4:00
PM Skills:
Certifications:
Active AWS (American Welding Society) certifications in GMAW (D1.1 for Steel / D1.2 for Aluminum).
Process Versatility:
Basic proficiency in TIG (GTAW) or Stick (SMAW) welding is a strong plus.
Fabrication Tools:
Hands-on experience using metal fabrication machinery (press brakes, shears, drill presses, band saws, plasma cutters).
2+ years of professional MIG (GMAW) welding experience working with both steel and aluminum.
Technical Knowledge:
Deep understanding of metal properties, joint fit-up, heat management (e.g., controlling distortion on thin-gauge aluminum), and appropriate shielding gas selection.
Equipment Mastery:
Demonstrated proficiency operating spool guns or push-pull wire feeders designed for soft aluminum wire.
Blueprint Literacy:
Ability to read and interpret technical drawings, schematics, and standard welding symbols without supervision.
Physical Demands:
Ability to lift up to 50 lbs, stand for extended periods, and work comfortably in a manufacturing shop environment.
Education:
High school diploma, GED, or completion of a vocational/technical welding program. We are seeking a skilled and reliable Aluminum and Steel MIG Welder to join our production team in Huntertown, IN. In this role, you will read blueprints, set up Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion.
Equal Opportunity Employer:
Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status. At Spherion, we welcome people of all abilities and want to ensure that our hiring and interview process meets the needs of all applicants. If you require a reasonable accommodation to make your application or interview experience a great one, please contact Callcenter@spherion.com. Pay offered to a successful candidate will be based on several factors including the candidate's education, work experience, work location, specific job duties, certifications, etc. In addition, Spherion offers a comprehensive benefits package, including: medical, prescription, dental, vision, AD&D, and life insurance offerings, short-term disability, and a 401K plan (all benefits are based on eligibility). Show less Show more
Welding & Fabrication:
Perform high-quality MIG welds on mild steel, stainless steel, and aluminum components across various positions (flat, horizontal, vertical, overhead).
Equipment Set Up:
Configure GMAW machines for specific metals, including setting appropriate voltage, wire feed speed, gas flow rates (e.g., 100% Argon for aluminum vs. Argon/CO2 mixes for steel), and drive roll setups (e.g., spool guns or push-pull systems for aluminum).
Material Preparation:
Clean, degrease, wire brush, and prep joints???especially aluminum surfaces???to eliminate oxides, oils, and moisture prior to welding.
Blueprint Reading:
Interpret mechanical drawings, AWS welding symbols, blueprints, and job specifications to measure, cut, and assemble components accurately.
Post-Weld Assembly & Finish:
Inspect welds for penetration, porosity, cracks, and undercut; grind, finish, or clean welds using hand and power tools as required.
Quality & Safety:
Maintain strict compliance with safety guidelines (PPE, ventilation, eye protection) and complete quality check documentation for finished parts.
Responsibilities:
...
Welding & Fabrication:
Perform high-quality MIG welds on mild steel, stainless steel, and aluminum components across various positions (flat, horizontal, vertical, overhead).
Equipment Set Up:
Configure GMAW machines for specific metals, including setting appropriate voltage, wire feed speed, gas flow rates (e.g., 100% Argon for aluminum vs. Argon/CO2 mixes for steel), and drive roll setups (e.g., spool guns or push-pull systems for aluminum).
Material Preparation:
Clean, degrease, wire brush, and prep joints???especially aluminum surfaces???to eliminate oxides, oils, and moisture prior to welding.
Blueprint Reading:
Interpret mechanical drawings, AWS welding symbols, blueprints, and job specifications to measure, cut, and assemble components accurately.
Post-Weld Assembly & Finish:
Inspect welds for penetration, porosity, cracks, and undercut; grind, finish, or clean welds using hand and power tools as required.
Quality & Safety:
Maintain strict compliance with safety guidelines (PPE, ventilation, eye protection) and complete quality check documentation for finished parts.
Working hours:
7:30 AM - 4:00
PM Skills:
Certifications:
Active AWS (American Welding Society) certifications in GMAW (D1.1 for Steel / D1.2 for Aluminum).
Process Versatility:
Basic proficiency in TIG (GTAW) or Stick (SMAW) welding is a strong plus.
Fabrication Tools:
Hands-on experience using metal fabrication machinery (press brakes, shears, drill presses, band saws, plasma cutters).
2+ years of professional MIG (GMAW) welding experience working with both steel and aluminum.
Technical Knowledge:
Deep understanding of metal properties, joint fit-up, heat management (e.g., controlling distortion on thin-gauge aluminum), and appropriate shielding gas selection.
Equipment Mastery:
Demonstrated proficiency operating spool guns or push-pull wire feeders designed for soft aluminum wire.
Blueprint Literacy:
Ability to read and interpret technical drawings, schematics, and standard welding symbols without supervision.
Physical Demands:
Ability to lift up to 50 lbs, stand for extended periods, and work comfortably in a manufacturing shop environment.
Education:
High school diploma, GED, or completion of a vocational/technical welding program. We are seeking a skilled and reliable Aluminum and Steel MIG Welder to join our production team in Huntertown, IN. In this role, you will read blueprints, set up Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion.
Equal Opportunity Employer:
Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status. At Spherion, we welcome people of all abilities and want to ensure that our hiring and interview process meets the needs of all applicants. If you require a reasonable accommodation to make your application or interview experience a great one, please contact Callcenter@spherion.com. Pay offered to a successful candidate will be based on several factors including the candidate's education, work experience, work location, specific job duties, certifications, etc. In addition, Spherion offers a comprehensive benefits package, including: medical, prescription, dental, vision, AD&D, and life insurance offerings, short-term disability, and a 401K plan (all benefits are based on eligibility). Show less Show more key responsibilities
Welding & Fabrication:
Perform high-quality MIG welds on mild steel, stainless steel, and aluminum components across various positions (flat, horizontal, vertical, overhead).
Equipment Set Up:
Configure GMAW machines for specific metals, including setting appropriate voltage, wire feed speed, gas flow rates (e.g., 100% Argon for aluminum vs. Argon/CO2 mixes for steel), and drive roll setups (e.g., spool guns or push-pull systems for aluminum).
Material Preparation:
Clean, degrease, wire brush, and prep joints???especially aluminum surfaces???to eliminate oxides, oils, and moisture prior to welding.
Blueprint Reading:
Interpret mechanical drawings, AWS welding symbols, blueprints, and job specifications to measure, cut, and assemble components accurately.
Post-Weld Assembly & Finish:
Inspect welds for penetration, porosity, cracks, and undercut; grind, finish, or clean welds using hand and power tools as required.
Quality & Safety:
Maintain strict compliance with safety guidelines (PPE, ventilation, eye protection) and complete quality check documentation for finished parts. experience 1-4 years skills
Certifications:
Active AWS (American Welding Society) certifications in GMAW (D1.1 for Steel / D1.2 for Aluminum).
Process Versatility:
Basic proficiency in TIG (GTAW) or Stick (SMAW) welding is a strong plus.
Fabrication Tools:
Hands-on experience using metal fabrication machinery (press brakes, shears, drill presses, band saws, plasma cutters).
2+ years of professional MIG (GMAW) welding experience working with both steel and aluminum.
Technical Knowledge:
Deep understanding of metal properties, joint fit-up, heat management (e.g., controlling distortion on thin-gauge aluminum), and appropriate shielding gas selection.
Equipment Mastery:
Demonstrated proficiency operating spool guns or push-pull wire feeders designed for soft aluminum wire.
Blueprint Literacy:
Ability to read and interpret technical drawings, schematics, and standard welding symbols without supervision.
Physical Demands:
Ability to lift up to 50 lbs, stand for extended periods, and work comfortably in a manufacturing shop environment.
Education:
High school diploma, GED, or completion of a vocational/technical welding program. education High School share this job. send via e-mail print it
