Utility Technician

1.

Utility Mechanical Technician Job Summary:

Mechanical technician in Utility is responsible for managing various mechanical facilities and their parts including air compressor, boiler, chiller, clean/dry room facilities, firefighting facilities, HVAC, and infra. Its main tasks include regular status check, fueling, replacement, and cleaning. This position is also required to take appropriate measures when there is any malfunction or damage of facilities.

Responsibilities:

Air Compressor Facility Maintenance Check and inject compressor motor oil if needed Disassemble and check compressor filters. Replace filter parts if needed Disassemble and cleanse compressor auto drain trap Run test operation of compressor Run test operation of air dryer Disassemble, cleanse, and test Air T/K(PA, IA) drain trap Disassemble and check dryer filters. Replace filter parts if needed NMP Recovery Facility Maintenance Measure circulating pump vibration coefficient Disassemble and cleanse circulating pump strainer regularly Grease motors Check tracing status before winter for freezing prevention Check operation status of eye shower Replace Fan V-belt A/C Tower Maintenance Grease A/C towers and air supplying/exhausting fans Replace V-belt of A/C towers and air supplying/exhausting fans Steam Boiler Facility Maintenance Replace and cleanse the micro-filter of water softener and purifier Disassemble and clean the chemical line Test LNG line instrument and leakage Set(blow-down), disassemble, and clean glass water gauge Test upper/under part of blow-down C/V function Disassemble and maintain condensate pump strainer and heat transmitter Disassemble and maintain DEMI pump strainer and heat transmitter Disassemble and maintain deaerator, boosting pump strainer and heat transmitter Grease and oil pump and run operation test Measure boosting pump vibration coefficient Grease and oil boiler fans and motors Check and maintain heat transmitter and S/T of boiler fans and motors Repair or replace boiler accessories and PG/TG Measure fuel consumption and make adjustment if needed Hot Oil Boiler Facility Maintenance Test LNG line instrument and leakage Grease and oil pump and run operation test Eliminate air and moisture in the expansion tank Measure hot-oil boiler pump/fan vibration coefficient Grease and oil boiler fans and motors Check and replace v-belt of fan if needed Chiller Facility Maintenance Run operation test of chiller expansion tank line Disassemble and maintain make-up water strainer Grease chiller cool water pump and remove strains Grease chiller cooling water pump and remove strains Inject chiller C/T (Cooling Tower) decelerator oil and run test operation Grease chiller C/T fan motor and run test operation

BCU/BFU/FFU

Maintenance Check BCU differential pressure and replace medium filter Replace BCU pre filter Replace BFU/HFU filter HVAC facility maintenance Grease HVAC inner fan bearing Check HVAC inner sensors and drainage status Test differential pressure sensor operation Disassemble and cleanse cool/steam/condensate water line strainers Adjust tension of v-belt and replace if needed Replace HVAC filter regularly Replace HVAC air vent and operate air purge Repair and replace HVAC steam trap and PG/TG EHP, PAC, Air Shower Facility Maintenance Check EHP/PAC operational status, and outdoor unit pressure condition Clean EHP/Package filter Replace Air Shower filter N2, NG Facility Maintenance Check and replace the meter Supervise PSC Popping test construction Legal Inspection Management Deal with regular inspection of government offices Document/keep legal inspection logs and related documents Facility Management Create and update facility management history Create and update inspection log Clean the facilities and facility room floors [Boiler only] Supervise pipe cleaning work Prepare and response to the legal inspections including open/in-use inspections [Chiller only] Purchase and manage inventory of C/T chemicals [HVAC only] Supervise pipe cleaning work Prepare and response to the legal inspections including open/in-use inspections Troubleshooting Take appropriate measure when the facility is malfunctioning or damaged Other tasks as necessary to meet the organization's needs

Role Duties and Responsibilities:

The S1 level is particularly expected to the following roles to perform the job successfully and contribute to meet the organization goals. Perform routine tasks under direct and/or indirect supervision Possesses broad knowledge of equipment, tools, and instructions/procedures obtained through work experience

Qualifications:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Education:

High School Diploma or GED (General Education Development) (Preferred), Associate degree in related field

Experience:

0-2 years of experience in EV Battery, auto part, automobile industry, or similar high- volume manufacturing in electric or chemical component Language skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals in English Ability to write routine reports and correspondence in English Computer skills: Basic skills in Microsoft Office (Excel, Word, PowerPoint, etc.)

Physical Requirements:

In the office: Must wear the company-provided uniform In the production site: Must wear the company-provided uniform and PPE including safety shoes, safety helmet (hard hat), safety glasses/safety goggles, portable gas measuring device In the A/C tower: Must wear dust-proof mask When exposed to NMP, hot oil: Additionally wear gas mask, dust-proof mask, chemical resistant clothing

Work Environment:

Usual office environment Production/construction site Risk of noise: Above 90db in compressor room Risk of high temperature: 104~122°F in boiler room, machine room, vacuum pump room Potential exposure to hazardous materials (heating medium oil, NMP, water treatment chemicals (boiler treatment compound, acidity regulator, etc.) and various kinds of lubricating oils The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards. Ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state and local standards. May occasionally left and/or move up to up to 50 pounds. Must be able to regularly stand, walk, sit, talk or hear. The employee is occasionally required to reach with hands and arms to include stoop, kneel, bend or crawl.

Core Competencies:

Professional Competencies:

Advanced understanding of UT facility Advanced troubleshooting ability to deal with facility malfunctions Advanced understanding of measuring tools and methods Ability to manage and prioritize workload Prepare routine documentation as required under limited supervision Ability to solve problems related to utility (mechanical) that might require analysis to understand

Role Competencies:

Performance Impact:

Perform routine tasks required for floor operations for relatively complex and difficult equipment (or production process) compared to S1 level Perform under direct and/or indirect supervision and follow standard instructions/procedures Suggest improvements in floor operations based on floor experience and

Knowhow Expertise:

Generally, require high school diploma or GED (For equipment maintenance, require knowledge/skills equivalent to an associate's degree) Require to complete internal/external training required to perform the job Possess broad knowledge of equipment, tools, and instructions/procedures obtained through work experience; Able to operate tasks of three to four sub- processes Identify irregularities and troubleshoots (encountered problems are routine but should be resolved through understanding of the equipment (or production process) Collaboration and Supervision Build stable and collaborative relationships within and across teams Take first action and report to superiors when identifying any irregularities which are not compliant to the instructions regarding work environment, equipment operation, raw materials, and quality of products Provide technical coaching and advice to S1 level members on the equipment (or production process) 2.

Utility Electrical Technician Job description:

Summary:

Utility (Electrical) technician works in routine, following standard procedures under supervision. He/She is responsible for managing electrical substation facilities, measurement/control system and their parts. His/her main tasks include regular status check, operation of electrical switches (including circuit breaker, MCCB, MCB), replacement and cleaning. He/She is also required to take appropriate measures when there is any malfunction or damage of facilities.

Job Duties and Responsibilities:

Electrical Substation Maintenance 25kV SWGR voltage, current measurement 25kV SWGR alarm lamp operational status check 25kV Substation thermal imaging camera inspection 25kV other visual inspection 25kV P/D measurement 4.16kV SWGR voltage, current measurement 4.16kV SWGR alarm lamp operational status check 4.16kV SWGR Substation thermal imaging camera inspection 4.16kV other visual inspection Switch gear (Low voltage) voltage, current measurement Switch gear alarm lamp operational status check Switch gear thermal imaging camera inspection Switch gear other visual inspection Mold TR (25kV/4.16kV, 25kV/LV) alarm lamp operational status check Mold TR transformer thermal imaging camera inspection Mold TR exhaust fan operational status check Mold TR other visual inspection Automatic Control System Maintenance HVAC control valve, panel inspection/repairment Steam boiler, hot oil heater, and NMP inspection/repairment Gas detector inspection/repairment Temperature & humidity sensor and indicator (HVAC, process inspection/repairment) PLC and PLC communication/alarm inspection/repairment Portable equipment (instrument) management and calibration Control room HMI screen drawing support Legal Inspection Management Deal with regular inspection of government offices Document and keep legal inspection logs and related documents Facility Management Clean the electrical substation Create and update facility management history Create and update inspection log Troubleshooting Take appropriate measure when the facility is malfunctioning or damaged Other tasks as necessary to meet the organization's needs

Qualifications:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Type:

Contract Education:

High school or equivalent (Required) Ability to

Commute:

Kingston, GA 30145 (Required)

Work Location:

In person

Job Type:

Contract Pay:

$22.00 - $35.00 per hour

Education:

High school or equivalent (Required) Ability to

Commute:

Kingston, GA 30145 (Required)

Work Location:

In person