Find & Apply For Drywall Installer / Finisher Jobs in Albuquerque, New Mexico

Job Title:

Exterior Metal Siding Installer /

Inspector Company:

Sentri Homes Location:

Albuquerque, NM Job Type:

Independent contractor, one-time project About the Job Sentri Homes is looking for an experienced contractor to inspect and install 29-gauge blue metal siding on a single-story manufactured home. Scope of Work 1. Pre-installation inspection Meet the homeowner on-site. A weekend visit is preferred. Inspect all exposed walls, sheathing, framing, and the lower structure. Check the foundation ledge and confirm it can support the panel weight. Identify any rot, damage, or missing substrate. Evaluate the roof edge, which has only about a ½" overhang, and recommend a water-management fix such as drip edge or flashing. Check under-home ventilation and access requirements. Verify measurements and provide a written materials list and any recommended extra work. 2. Framing and backing Install pressure-treated 2x4 framing and backing along the lower wall so panels have solid fastening points. Keep proper clearance from grade. 3. Weather barrier and flashing Repair or install house wrap where needed. Flash windows, doors, penetrations, and the roof-edge transition. 4. Metal siding installation Install 29-gauge, 12-ft vertical metal panels in blue, running from the roofline to the bottom of the wall with no separate skirting.

Install all matching trim:

corners, base, J-trim, and window and door trim. Use manufacturer-approved fasteners and seal penetrations. 5. Access panels Build two removable access panels, one at the water shut-off and one at the rear plumbing area. Frame and trim both, with the sharp edges finished. 6. Final inspection and cleanup Check alignment, fasteners, and trim, and test both access panels. Clean up all metal shavings and debris from the roof, ground, and driveway. Photo Documentation (Required)

Before:

All four elevations of the exposed walls, the roof edge, the foundation ledge, any rot or damage, and the plumbing and shut-off locations.

During:

Framing and backing, house wrap and flashing, roof-edge work, and the access-panel framing, all taken before anything is covered.

After:

All four elevations, trim details, both access panels (open and closed), the roof-edge detail, and the cleaned work area. Requirements Metal siding or exterior remodel experience Own tools and a reliable truck Ability to read and follow a written scope Photo documentation with a smartphone License and insurance requirements Weekend availability How to

Apply Email:

rachael@sentrihomes.com 9282721059

Pay:

$2,000.00 - $2,500.00 per week

Work Location:

In person