Concrete Finisher Position Available In Wake, North Carolina

Concrete Finisher Blythe Construction dental insurance, life insurance, vision insurance, parental leave, short term disability, long term disability, 401(k) United States, North Carolina, Raleigh Jun 26, 2025 Concrete Finisher General Description A Concrete Finisher is an hourly-rated skilled craft position that performs on construction projects any combination of the duties described more fully, below. A Concrete Finisher typically performs a wide variety of tasks, transferring from one task to another as the work flow dictates. Key Duties Smooth and finish surfaces concrete slabs to specified textures, using hand tools or power tools including floats, trowels and screeds
Spread concrete to specified depth and workable consistency
Mix sand and cement, and concrete by hand
Use float to bring water to surface and produce soft topping
Level, smooth and shape surfaces of freshly poured concrete using straightedge, float or power screed
Finish concrete surfaces using power trowel
Rub concrete with abrasive stone to finish
Remove rough or defective spots from concrete surfaces, using power grinder, chisel or hammer
Patch holes with fresh concrete or epoxy compound material
Mold expansion joints and edges using edging tools, jointer or straight edge
Mix concrete using a mixing machine
Add material to concrete to produce required finish
Break up and repair old concrete surfaces
Must be able to walk on rebar
Perform incidental work items and duties included within other crafts Qualification Requirements General. To perform this job successfully, an individual must be able to perform each Key Duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and Experience. This position typically is not an entry-level job, as it requires demonstrable previous experience as a Concrete Finisher. A high school diploma or general education degree (GED) is preferred.
Must be able to understand work directions and communicate effectively with job site supervisors and fellow employees.
Three (3) to Five (5) years or more of industry related experience is required for this position, with an emphasis on roads, highways, and bridges. Physical Demands. The following physical demands are representative of those that must be met by a Concrete Finisher to successfully perform the essential functions of this job. Constant physical effort, including standing, is required during a regular work shift of at least eight hours per day. Employee must be able to stand for extended periods of time, and to stoop, bend, and crouch as required to perform Key Duties.
Work is often performed at heights up to 60 feet, requiring the employee to climb ladders, scaffolds and stair towers, often with narrow steps and passageways.
Frequently work with hands extended overhead, sometimes in conjunction with the operation of hand power tools.
Ability to lift and carry, on a frequent basis, at least 50-90 pounds personally, and up to 150 pounds with assistance.
Manual dexterity to hand-carry generators, lumber and other construction materials, forms, power tools, and hand tools.
Capable of operating concrete vibrators for extended periods of time.
Physical dexterity to pour, grade and finish concrete, involving stretching, proper placement of legs, and use of arms and hands in repetitive motions.
Maintain constant alertness to the multiple concurrent activities of the construction site, including the activities of other employees and contractors, the operation of stationary equipment, and the movement of mobile equipment.
Frequently walk on uneven surfaces, including natural ground in varying weather conditions.
Capable of being certified to enter confined spaces, including climbing into and out of excavations up to 15 feet in depth, using ladders or crawling, as required.
Sufficient skill and visual acuity, under varying degrees of light, darkness, and weather conditions, to provide direction and flagging for operators of cranes with rated capacities of up to 300 tons.
Capable of safely and productively operating a man-lift.
Ability to maintain balance while working on water craft or other surfaces. Work Environment. The work environment characteristics described below are representative of those that a Concrete Finisher encounters while performing the essential functions of this job. Work is performed outdoors in all weather conditions.
Work environment periodically exposes the employees to high levels of noise, grease, and dust that are typically associated with a construction project.
Employee regularly works near heavy equipment and moving machinery.
Work may involve a variety of substances commonly found on construction sites such as form oil, grease, curing compounds, gasoline, diesel fuel and ready mixed concrete.

Company Benefits:

Company Paid Basic Life Insurance
Company Paid Long Term Disability Policy
Company Paid Vacation & Holiday Pay
Company Paid Parental Leave
Company Paid Maternity Leave
Company Paid Employee/Family Assistance Program (EAP)
Voluntary Medical & Vision Insurance
Voluntary Dental Insurance
Voluntary Short Term Disability
Voluntary Supplemental Term Life
Voluntary Accident, Legal, Hospital, Critical Illness Policies
401(k) Plan w/Employer Match
Annual Company Stock Purchase Opportunities

Discount Partnerships:

Verizon, Ford, Perkspot
Health and Wellness Benefits, including Monthly Gym/Fitness Incentives We promote a Drug-Free Workplace. EOE AA M/F/Vet/Disability are encouraged to apply.